When the dynamic balancing machine is normally used to perform dynamic balance correction, the detection accuracy is lowered, and such an inaccurate detection may cause the workpiece to be unbalanced. Long-term use will damage the workpiece, so it must be ensured that the balancing machine has high measurement accuracy and meets the standard of use.

There are many reasons for the balance machine not working properly or not achieving balance accuracy, and the balance machine itself or the electrical measurement system account for a large part. As long as a certain link is not normal, it will definitely affect the imbalance of the balance machine workpiece.

The important reasons for the impact of the balancing machine itself are the following:

1. The foundation of the balance machine is not in compliance with the specified level. The bottom joint is not covered, the anchor bolts are not fastened, or placed on the floor to stimulate resonance.
2. The drive belt does not meet the requirements, and there are obvious link seams.
3. There are irregularities at the left and right support, so that the rotor is tilted to the left or right or the plane of the journal is rubbed against the support; the support block is seriously worn or the roller jumps to increase; the support has impurities, no lubrication; the movable frame can move zero. The fastening screw at the part is not fastened.
4. The output signal of the sensor is abnormal.

Maintenance solution for balancing machine measurement accuracy reduction:

1. The surface of the support block or roller should be kept clean. It is forbidden to adhere to iron filings and dust. Before each operation, clean the support block or roller and rotor journal, plus a small amount of smooth oil.
2. Due to the low temperature in winter, the computer system below zero will occasionally appear slower, which is due to normal phenomenon and does not affect the normal use of the balance machine.
3. It is necessary to scrub the balancer frequently, keep the balancer clean, keep the surface of the guide rail clean, and often apply oil and rust.
4. When moving the support frame, the rotor should be changed or the left and right support frames should be moved at the same speed to prevent the surface of the journal and the roller from being scratched. The rotor is placed on the roller frame for hitting or hitting.

The accuracy of the dynamic balancing machine is an important indicator for checking the quality of the dynamic balancing machine. A slight deviation error will cause a great influence on the balancing machine. Therefore, we must consider more choices in the choice. Guangzhou Zhuo Xuan Jin balance machine manufacturers of high-precision balancing machine, will bring you a completely different experience. Guangzhou Zhuo Xuanjin is a well-known balance machine supplier specializing in the independent research and development of dynamic balancing machines. The product has high precision, high reliability, structural design with beautiful appearance, small size and light weight. Choosing Guangzhou Zhuo Xuan Jin Balance Machine is your best choice. Zhuo Xuan Jin balance machine, trustworthy!

Guangzhou Zhuo Xuan Jin balance machine manufacturers: balance machine \ dynamic balancing machine \ dynamic balance \ automatic balancing machine, automatic positioning balance machine \ circle with balancing machine \ crankshaft dynamic balancing machine \ universal joint balancing machine \ drive shaft balancing machine \Double-sided vertical dynamic balancing machine\single-sided vertical balancing machine\special dynamic balancing machine\balance measuring system. For more details, please contact Zhuo Xuanjin Balance Machine website customer service.