lzx@zxjsb.com

020-36969823

Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website

Search

zuoxuanjin

Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd

18933956581
Customer service team:
在线客服
QQ:
Service time:
0:00 - 24:00

ABOUT US

Follow us

SITE NAVIGATION

CONTACT US

© 2018  Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd  |  All rights reserved 粤ICP备14035600号

 

Contact: Miss Li
Fax: 020-36969822
Tel: 020-36969823
Mobile phone: 18933956581
Mailbox: yingliokok@163.com

SOLUTION

 

Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)

SOLUTION

>
>
>
Maintenance and maintenance of double-sided vertical balancing machine

Maintenance and maintenance of double-sided vertical balancing machine

Page view
[Abstract]:
Nowadays,withthedevelopmentoftechnology,moreandmoremanufacturersaredemandingtheimprovementofproductquality.Double-sidedverticalbalancingmachineisverypopularinthemarket,butwereallyunderstandthedouble-s

Nowadays, with the development of technology, more and more manufacturers are demanding the improvement of product quality. Double-sided vertical balancing machine is very popular in the market, but we really understand the double-sided vertical balancing machine. Is there some common maintenance work after applying the double-sided vertical balancing machine?
1. Equipment is adjusted every 6 months
2. Never use compressed air or water jets to remove dust and debris from the equipment. Prevent dust from entering the building and cleaning operations.
3. Maintain the balance shaft, nut, cone and flange cleaning. If these parts are cleaned, use a brush soaked in a neutral solution to clean them.
4. Be careful to use cones and flanges to prevent accidental drops and damage. The result is an accurate centering that, after application, places the cone and flange in a dust-tight space.
5. The bearings of the components must be inspected and lubricated regularly by the operator. Do not open the bearing during the test. Just insert a screwdriver and check the sound. Because the bearing is clamped and supported, it is not suitable for replacing or removing grease; adjust the equipment after replacing the grease. In addition, it is not very fast for the equipment, so there is no need to replace the grease. If you notice that the bearing is working abnormally or is noisy, replace the bearing. If the lubrication is replaced incorrectly, it will affect the precision of the equipment. In this case, reinstall the seal, reinstall, and repeat the adjustment.
The precision of the dynamic balancing machine is an important indicator to check the quality of the dynamic balancing machine. A slight error error will cause a large impact on the dynamic balancing machine. Therefore, more consideration should be given to the selection of dynamic balancing machines. Guangzhou Zhuo Xuan Jin dynamic balancing machine manufacturers of high-precision dynamic balancing machine, will bring you a completely different experience. Guangzhou Zhuo Xuanjin is a well-known dynamic balancing machine supplier specializing in the independent research and development of dynamic balancing machines. The product has high precision, high reliability, structural design with beautiful appearance, small size and light weight. Choosing Guangzhou Zhuo Xuan Jin Dynamic Balancing Machine is your best choice. Zhuo Xuan Jin dynamic balancing machine, trustworthy!