Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website
Contact: Miss Li
Mobile phone: 18933956581
© 2018 Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd | All rights reserved 粤ICP备14035600号
Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)
What are the factors that reduce the precision of the dynamic balancing machine?
The dynamic balancing machine mainly uses the power of the rotor to complete the work. With the fact that the dynamic balancing machine is widely used by many manufacturers in the manufacture and repair of automobile transmission shafts, it has the characteristics of convenient operation and high balance precision, and has gradually become a car. The application of the dynamic balance measurement of the transmission shaft has become widely used in our lives. However, when we apply the dynamic balancing machine, we will find that there are certain deviations. What is the reason for this situation?
1. Weight of the base: The weight of the base mainly affects the weight reduction rate. When the same effect is required, the base of the soft-support dynamic balancing machine can be reduced several times than the hard support.
2. Concentricity of the swinging spindle: There is a main shaft on the pendulum on the balancing machine. Whether the two main shafts are concentric has no effect on the balance effect, which is mainly affected by the characteristics of the transmission shaft.
3. Accuracy: Accuracy is a very important factor affecting the deviation of the dynamic balancing machine. The precision of the dynamic balancing machine affects the detection result of the dynamic balancing machine. Therefore, we must select the high-precision dynamic balancing machine. The precision is mainly related to the dynamic balance. The connection method of the machine is related.
4. Weight loss rate: The weight loss rate is a very important factor affecting the deviation of the dynamic balancing machine. In order to balance the front drive shaft, you can also get the effect. When choosing the connection method, you should be very careful.