lzx@zxjsb.com

020-36969823

Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website

Search

zuoxuanjin

Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd

18933956581
Customer service team:
在线客服
QQ:
Service time:
0:00 - 24:00

ABOUT US

Follow us

SITE NAVIGATION

CONTACT US

© 2018  Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd  |  All rights reserved 粤ICP备14035600号

 

Contact: Miss Li
Fax: 020-36969822
Tel: 020-36969823
Mobile phone: 18933956581
Mailbox: yingliokok@163.com

SOLUTION

 

Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)

SOLUTION

>
>
>
Maintenance of cross flow impeller dynamic balancing machine

Maintenance of cross flow impeller dynamic balancing machine

Page view
[Abstract]:
Thedailymaintenanceofthecross-flowimpellerdynamicbalancingmachinemustalwaysensurethatthebalancingmachineisclean,thecodingoftheguiderailshouldbekeptclean,anditisnecessarytoapplyoilandrustfrequently.The

The daily maintenance of the cross-flow impeller dynamic balancing machine must always ensure that the balancing machine is clean, the coding of the guide rail should be kept clean, and it is necessary to apply oil and rust frequently.
The surface of the support block or roller should be kept clean. It is strictly forbidden to adhere to iron filings and accumulated dust. Every time the cross-flow impeller balancing machine should clean the support block or the roller and the rotor journal before working, add a small amount of lubricating oil. When moving the support frame, the rotor should be rotated together or the left and right support frames should be moved at the same speed to prevent the surface of the journal and the roller from being scratched. It is not allowed to place the rotor on the roller frame for tapping or collision.
The cross-flow impeller dynamic balance electromechanical measuring box is the core component of the balancing machine. It must be protected from vibration and moisture and should be stored properly. The electrical box switch should be turned off after the work is over.
If the cross-flow impeller dynamic balance electromechanical measuring box is not used for a long time, it should be preheated for several hours.
All knobs and switches on the cross-flow impeller dynamic balance electromechanical measuring box panel can not be easily moved to prevent damage to components and data errors.
The lens glass of the photoelectric head of the cross-flow impeller dynamic balancing machine should always use the lens paper or the mirror cloth to clear the outer surface of the lens to keep it clean. Do not wipe the mirror surface with a greased yarn or dirty cloth.
The cross-flow impeller dynamic balancing machine is a sophisticated testing equipment, and should be stored and operated by a special person.