lzx@zxjsb.com

020-36969823

Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website

Search

zuoxuanjin

Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd

18933956581
Customer service team:
在线客服
QQ:
Service time:
0:00 - 24:00

ABOUT US

Follow us

SITE NAVIGATION

CONTACT US

© 2018  Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd  |  All rights reserved 粤ICP备14035600号

 

Contact: Miss Li
Fax: 020-36969822
Tel: 020-36969823
Mobile phone: 18933956581
Mailbox: yingliokok@163.com

SOLUTION

 

Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)

SOLUTION

>
>
Zhuo Xuanjin explains the unstable factors of the measurement data of the balancing machine

Zhuo Xuanjin explains the unstable factors of the measurement data of the balancing machine

Page view
[Abstract]:
In 2018, there are incomplete statistics. There are thousands of dynamic balancing machines in China. The craftsmanship and technology for making balancing machines are becoming more and more mature.

In 2018, there are incomplete statistics. There are thousands of dynamic balancing machines in China. The craftsmanship and technology for making balancing machines are becoming more and more mature. The balancing machines that were previously needed are generally maintained by imports, and it is because of the present The development of science and technology has advanced by leaps and bounds, with the increase of high-tech talents and abundant funds. I have got rid of the situation that can only be developed by import. Nowadays, the company of dynamic balancing machine has been widely spread in China. The following Zhuo Xuanjin Xiaobian will explain in detail for everyone. The measurement of the circle-driven balancing machine will always cause such a problem, and the measurement value is extremely unstable, for the following reasons:

 


1. The top force of the axial stop frame of the ring-driven balancing machine is too large.
2. The ring drive dynamic balancer vibration sensor transmission rod is loose, or the vibration is blocked.
3. The ring-driven balancing machine vibration sensor line plug or socket is loose, causing the signal to be blocked.
4. The rotor shaft of the circle-driven balancing machine has a curved or rounded jump and a poor finish.
5, roller bearing ball wear or roller outer round finish, round beat over tolerance.
In addition, it must be noted that the dynamic balancing machine is a type of instrumentation type testing machine. Irregular operation of the balancing machine (such as welding, sanding, etc. on the balancing machine) will directly lead to the performance and life of the balancing machine, resulting in a balance failure, and pay attention to these problems. In addition, after the balancing machine is finished, it is necessary to inspect and clean the equipment, and do the daily balancing machine maintenance work to achieve a safe, clean and lubricated state.