Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website
Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)
Zhuo Xuanjin explains the seven factors of the rotor imbalance of the dynamic balancing machine
When we use the dynamic balancing machine, we will use a very important component, that is, the rotor, but we will also see the imbalance of the rotor of the balancing machine during the process of use. This time we need to come to it. Adjustments are made, but we also need to adjust according to the type of rotor imbalance of the balancing machine when making adjustments. Below, the small series will briefly introduce several reasons for rotor imbalance. I hope that through this article, you can get a preliminary understanding of the dynamic balancing machine rotor.
1. Assembly error, the center line of the part of the part is inconsistent with the center line of rotation during installation.
2. There are deposits on the rotor,
3. Casting pores,
4. Half-key problem,
5. Rotor deformation, due to residual stress, heat unevenness caused by rotor deformation,
6. Assembly error,
7. The design is uneven, such as the motor rotor winding is uneven on one side and uneven on the other side.
For the above reasons, the rotor is somewhat unbalanced. The sum of all unbalanced vectors distributed over the rotor can be thought of as a vector centered on the "focus." A dynamic balancing machine is used to determine the position and size of the unbalanced rotor. A technique that then removes or adds weights of the same size at the appropriate locations. There are many types of balancing machines. Different types of rotors have suitable dynamic balancing machines. Everyone must have a certain understanding of the balance requirements of different types of rotors.
Guangzhou Zhuo Xuan Jin Balance Machine Co., Ltd. is a high-tech enterprise specializing in R&D, design and manufacture of dynamic balancing machines. The main products independently developed include: high-precision computer system, digital system, PLC system multi-station automatic balancing machine, vertical and horizontal, soft/hard support, single/double balancing machine, axial/crossflow fan, grade specific / Universal/special workpiece custom type dynamic balancing machine.
Through the above understanding, you should have a better understanding of the test machine products, if you have other questions, you may wish to contact our online customer service: 020-36969823.