The universal joint balancing machine is an instrument for measuring rotor imbalance. It belongs to the hard bearing balancing machine. The rigidity of the pendulum is very large. The balance of the rotor is corrected by the measurement result of the dynamic balancing machine, so that the vibration or the action generated when the rotor rotates. The vibration on the bearing is reduced to an allowable range to reduce vibration, improve performance and improve product quality. Then how to check the abnormality of the measurement data of the universal joint balancing machine? The following small series will introduce you to everyone.
    One. Prepare a motor rotor with a mass of 1 to 5 tons, install the rotor on the balancer and connect it to the universal joint.
    two. Measure the position size (A, B, C, R1, R2) of the rotor on the balancing machine and record that the unit of size is mm.
    1: the distance from the center of the left support frame roller to the left measurement surface;
    2: measuring the distance between the faces;
    3: the distance between the right measuring surface and the right support roller;
    4: The left measuring surface measures the distance from the measuring point to the balance axis;
    5: The left measuring surface measures the distance from the measuring point to the balance axis.
    three. According to the support state of the rotor on the balancer and the size of the balance measuring surface, the support state (n0=1), A, B, C, R1, R2
    four. Start the balancing machine and minimize the amount of unbalance of the workpiece (or compensate to the minimum). The balance speed is between 300r/min and 650r/min.
The above is about checking the abnormality of the balance measurement data of the universal joint balancing machine, and hopes to help everyone. If you have any other questions, please contact our online customer service: 020-36969823.
Guangzhou Zhuo Xuanjin engineers reminded that the dynamic balancing machine is a high-precision measuring instrument. The maintenance personnel are required to have certain electrician knowledge, especially the weak electricity knowledge, so choose the approved professional maintenance as much as possible.