Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website
Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)
5 minutes a day, let the balance machine effectively extend the service life
The balancing machine is identical to all other mechanical products. If the daily maintenance and maintenance is not good, the same product quality and its service life will be shortened a lot, so you must pay attention to the daily maintenance and maintenance of the machine when using the balance machine, in fact, it is also the life of the machine in disguise, which can Better save the company more cost.
Today let's take a look at what we should do to extend the life of the balancer.
1. Always wipe the dynamic balance machine, adhere to the balance machine cleaning, the surface of the guide rail should be kept clean, and often painted with oil and rust;
2. The outer surface of the support block or roller should be cleaned to prevent iron filings and dust debris from sticking. Clean the support block or roller and rotor journal before each operation, add a small amount of lubricant;
3. When moving the support frame, the rotor should be converted together or the left and right support frames should be moved at the same speed to avoid scratching and wear on the outer surface of the journal and the roller. The rotor should not be impacted or worn on the roller bracket. Ma Ping.
4. In winter, due to the low temperature, the computer system below zero is decelerated to a normal state due to an accident, and does not affect the normal operation of the balancer.
Of course, these are basic maintenance, we must operate the machine according to the instructions in the manual during use, rather than in the case of not familiar with the balancing machine principle or balancing machine operation. Free operation, not only has a certain risk, but also has a great damage to the life of the balancing machine.
Guangzhou Zhuo Xuanjin engineers reminded that the dynamic balancing machine is a high-precision measuring instrument. The maintenance personnel are required to have certain electrician knowledge, especially the knowledge of weak electricity. For this reason, the professional technicians who choose to identify it should be repaired as much as possible. After-sales service consultation telephone: 020-36969823.