When you purchase a balancing machine that is suitable for the production of your own workpiece, you also need to master the basic principle structure of the balancing machine, and know the basic knowledge, even though the balancing machine manufacturer will have on-site installation and specific guidance. However, we also need to master its installation and actual operation, so that we can solve problems and improve efficiency more effectively. Today, we will let everyone know about the installation operation of Guangzhou Zhuo Xuanjin's universal vertical balance machine.

The installation of the balancing machine is very simple. Since the bed and control cabinet of the balancing machine are all debugged before delivery, you can directly select the position to be placed. Then we only need to install the balancer drive system, then install the balancer detection system and the sensing system, and the vertical balancer is installed.

After the installation of the vertical balancing machine is completed, first steps: First, we need to turn on the power of the balancing machine, turn on the power switch, and wait for the computer to enter the balancer detection system interface. Then we can install the workpiece to be tested on the balancing machine, measure the workpiece size and input it into the balancing machine detection system, and follow the balancing machine operation prompt step by step to complete the dynamic balance correction of the workpiece. Another point we need to pay attention to, we are When changing the other workpieces for dynamic balancing, it is necessary to replace the fixtures that match the workpieces and then correct them. It is not necessary to remove the special fixtures of the drive shaft. This balance machine can continue to work, we can also use it with confidence. If you have any questions or other questions, please contact us directly at Zhuo Xuan Jin Balance Machine official website.