Reasons and solutions for the balance machine
When the user is in school balance, it is often difficult to balance or fail to achieve the required balance accuracy or balance. After the assembly of the workpiece, there is still a large residual unbalance. In this case, there are many factors influencing the analysis. The reason for this phenomenon is to take effective measures to improve the balance accuracy. Here, we will only briefly describe the common ones. The analysis is as follows:

1. The small motor rotor shaft is eccentric or curved, which causes the measurement error to be too large to accurately find the balance angle..
2. There is dirt on the bearing surface, and the motor will jump when it rotates.
3. The fixed top forging line is not locked, and the bracket is loose, resulting in unstable balance signal input of the balancer test system.
4. The drive belt is too tight.
5. The test speed exceeds the dynamic balance parameter speed.
6. The sensitivity of the sensor is too high or too low, resulting in unstable test speed and affecting the imbalance.
7. The sensor is faulty or the sensor line is shorted or disconnected. The test system is broken.

When it comes to problems, the right solution is the key. Learn more about the faults and solutions that are common when using a balancing machine. It is harmless to the operation of the dynamic balancing machine.

Guangzhou Zhuo Xuanjin engineer reminds: Dynamic balance machine is a high-precision measuring instrument after all, maintenance personnel require certain electrician knowledge, especially weak electricity knowledge, so choose the approved professional maintenance as much as possible, Guangzhou Zhuo Xuan Jin dynamic balancing machine after-sales maintenance Service consultation: 020-36969823.