The vertical balancing machine refers to the balancing machine that the drive spindle bearing is a vertical installation. The measuring principle of the vertical balancing machine is basically the same as that of the general horizontal balancing machine. There are also soft and hard bearings, single and double-sided, but it is suitable for dynamic measurement of disc-shaped workpieces without spindle. It is suitable for testing instruments such as fans, blades, impellers, brakes, clutches, pulleys and other disc-shaped workpieces for balance correction.
In the industrial production, the vertical balance machine must be kept clean, the surface of the guide rail should be kept clean, and the oil-proof rust-proof support block or the surface of the roller should be kept clean, and the iron scraps and dust and debris should not be adhered. Clean the support block or the roller and the rotor journal with a little oil. When moving the support frame, the rotor should be rotated at the same time or the left and right support frames should be moved at the same speed at the same time to avoid scratches and wear on the surface of the journal and the roller. It is not possible to place the rotor on the roller frame for tapping.
The lens glass of the photoelectric head should always use the lens paper or the mirror cloth to clear the appearance of the lens to keep it clean. Never use the oily yarn or dirty cloth to wipe the mirror surface. The balancing machine is a sophisticated testing instrument. The abnormal phenomenon of the balancing machine should be reserved and stored by a special person. The electrical measuring box is a key component of the balancing machine and must be protected from vibration and moisture and should be kept in a safe place. After the work is completed, the electric measuring box switch electrical measuring box should be turned off. If it is not applied for a long period of time, it should be energized and warmed up for several hours. All knobs and switches on the panel of the electrical test box shall not be arbitrarily moved to avoid damage to components and measurement errors.
According to the application classification: there are general-purpose balancing machines (such as balance motor, water pump rotor) and special-purpose balancing machines (such as car brake discs, outer rotors, etc.); horizontal balancing machines, vertical balancing machines, large, medium, small, special Mini balance machine.
According to the principle classification: there are soft bearing balance machine, hard support balance machine, centrifugal balance machine and gravity balance machine. Vertical balancing machine sub-bridge equipment and electrical measurement control equipment. Among them, many bridge manufacturers have used new materials in recent years to improve their vibration-damping performance. The module design is applied to apply one device at the same time and can be applied to a variety of rotors. The development trend of electrical control flow is from electron tube to Semiconductors, to integrated circuits, from analog circuits to digital circuits, the development trend can be said to be a thousand miles, rapid development.
According to the above understanding, you should have a better understanding of the balancing machine. If you have any other questions, please contact us Guangzhou Zhuoxuanjin Machinery Equipment Co., Ltd.