lzx@zxjsb.com

020-36969823

Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website

Search

zuoxuanjin

Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd

18933956581
Customer service team:
在线客服
QQ:
Service time:
0:00 - 24:00

ABOUT US

Follow us

SITE NAVIGATION

CONTACT US

Contact: Miss Li
Fax: 020-36969822
Tel: 020-36969823
Mobile phone: 18933956581
Mailbox: yingliokok@163.com

© 2018  Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd  |  All rights reserved 粤ICP备14035600号

 

SOLUTION

 

Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)

SOLUTION

>
>
[Notes on using the balance machine] What should you pay attention to when using the balance machine?

[Notes on using the balance machine] What should you pay attention to when using the balance machine?

Page view
[Abstract]:
In today's production enterprises, the probability of unbalanced rotor failure is very high, accounting for more than 30% of the cause of rotating machinery failure. When the rotor is unbalanced, it w

In today's production enterprises, the probability of unbalanced rotor failure is very high, accounting for more than 30% of the cause of rotating machinery failure. When the rotor is unbalanced, it will cause vibration of the whole machine and generate noise, accelerate the wear of the bearing, reduce the service life of the machine, and even cause the machine control to malfunction and cause serious accidents. In order to reduce the imbalance of the rotor, many production companies nowadays are equipped with dynamic balancing machines. So what do you need to pay attention to when using the balance machine? The following Zhuo Xuan Jin Xiaobian introduced to everyone.

1. The outer part of the supporting joint needs to be kept clean. Check carefully before work, add lubricating oil, and keep the surface smooth during the operation.
2. The parts of the swing frame have been adjusted before leaving the factory, and should not be disassembled at will during use.
3. Add 30 parts of oil to the smooth part before each shift. Each butter should be cleaned and oiled once a year.
4. The locking arrangement should be able to lock the swing frame reliably. When loosening, it should be completely free from the shaking part. The swing frame should only be loosened when measuring. It should be locked at other times. The wheel frame should not be moved when locked.
5, non-working time on the swing frame should not be placed on the balanced workpiece for a long time.
6, the electrical box should be kept clean to avoid damp.
7. When the machine finds that the abnormality cannot be handled during the use, it should stop the power supply and contact the manufacturer.

Through the above understanding, you should have more knowledge of the balancing machine. If you have other questions, you may wish to contact us Guangzhou Zhuoxuanjin Machinery Equipment Co., Ltd.