In the process of using the balancing machine, it is still a headache for the balancing machine to be hot. Everyone knows that the balancing machine has a great influence on the measurement of the rotor, which causes various problems. Due to the long-term use of the balancing machine, the lack of timely maintenance, the overloading of the balancing machine, or the occurrence of collisions, movements, etc., it is possible to cause the balancing machine to measure abnormalities and cause heat. Then how to deal with the balance machine fever, how to solve it? Zhuo Xuanjin dynamic balancing machine Xiaobian summed up several methods to solve the problem of balancing machine heating problems, let's take a look.

1, the balance machine power is too small
The weight of the rotor exceeds the range of the load measuring device of the balancer, resulting in a “small horse-drawn carriage”, which makes the balancer measurement very “strenuous”. When the load is overloaded, the balance machine will generate heat and reduce the service life of the balance machine. Solution: Re-purchase the balancing machine for this weight rotor.

2. Insufficient lubricating oil or improper use of lubricating oil
In the measurement process, due to too little lubricating oil, the friction between the gears causes the balancer to rise due to excessive friction temperature; or the selection of the lubricating oil should be suitable for the right one, for example, the high-power balancing machine should select more. Good lubricants, and low-power balancing machines apply grease.

3, the working environment is not ventilated
The working environment of the balance machine is not ventilated. It is also an important reason for the heat. The position of the balance machine is at a dead angle or covered by the object for a long time, so that the balance machine can not normally dissipate heat and cause high temperature. In severe cases, the balance machine will burn out. Solution: Do a good ventilation environment. If the temperature is too high, you can blow it with a fan to help cool down.

The method of balancing the heat of the machine Zhuo Xuan Jin dynamic balancing machine Xiaobian told everyone about the three phenomena and solutions, so it is more economical to do it yourself.