lzx@zxjsb.com

020-36969823

Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website

Search

zuoxuanjin

Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd

18933956581
Customer service team:
在线客服
QQ:
Service time:
0:00 - 24:00

ABOUT US

Follow us

SITE NAVIGATION

CONTACT US

© 2018  Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd  |  All rights reserved 粤ICP备14035600号

 

Contact: Miss Li
Fax: 020-36969822
Tel: 020-36969823
Mobile phone: 18933956581
Mailbox: yingliokok@163.com

SOLUTION

 

Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)

SOLUTION

>
>
How many ways does a dynamic balancer drive a rotor? Introduction of the dynamic balance machine driving the rotor

How many ways does a dynamic balancer drive a rotor? Introduction of the dynamic balance machine driving the rotor

Page view
[Abstract]:
The measurement accuracy of the dynamic balance machine is related to the driven rotor mode of the dynamic balance machine. If the driven rotor system of the dynamic balance machine fails, there is no

The measurement accuracy of the dynamic balance machine is related to the driven rotor mode of the dynamic balance machine. If the driven rotor system of the dynamic balance machine fails, there is no way to start the dynamic balance machine. One of the headaches for rotor manufacturers. So, is it that different ways of driving the rotor have an impact on the measurement accuracy of the dynamic balancer? Today, I will introduce several ways for the rotor to be driven by the balancing machine.

1. Loop-driven balancing machine: The rotor is driven by a motor pulley, which uses a belt or a silk belt. Therefore, the rotor surface must have a smooth cylindrical surface. When the belt is used to drive the rotor, the unbalance amount of the rotor is not affected, and the balance accuracy is high.


 

2. Gimbal balancing machine: Use universal coupling to connect the main shaft of the balancing machine to the rotor. The characteristics of the universal joint driven rotor are: suitable for irregular rotors, which can transmit large torque, suitable for driving rotors with large wind resistance such as rotor fans.

 


3. Self-propelled motorized balancing machine: Rotation of the rotor itself. The self-driven rotor of the balancing machine has the least impact on the balance accuracy, and the balance accuracy can be higher, but only the special rotor allowed by the structure can use this drag mode.

 


A very important part of driving a rotor balancing machine, each transmission mode is realized by using different principles, so we must choose a dynamic balancing machine suitable for our products according to our actual situation.

The above are the three common ways that the dynamic balancing machine drives the rotor. The dynamic balancing machine industry is now developing rapidly. Different driving methods have a certain impact on the measurement accuracy of the dynamic balancing machine, but they are all possible. Ensure that the dynamic balance machine can measure normally. If consumers want to choose a driving method that is more suitable for their products, they can use Guangzhou Zhuoxuanjin Machinery Equipment Co., Ltd .: 18933956581 (same number on WeChat). I hope the introduction of Xiaobian will help everyone .