Dynamic balancing machine is an important instrument to improve product quality, and it is also a symbol of the enterprise, making the product very competitive in the market. After the new balancing machine arrives at the factory, it should pay attention to its cleaning problems, and when cleaning, it involves many places. Today, I will share the cleaning knowledge of the dynamic balancing machine with everyone, so that everyone's dynamic balancing machine can be best maintained.

In fact, it's simple. I will tell you the trick.
Never place the rotor on a roller stand for impact. An unbalanced rotor generates pressure and causes vibrations on its support structure and the rotor itself during its rotation. Therefore, the dynamic balance of the rotor is very necessary.

1. The surface of the support and connection part should be kept clean. Check it carefully before work, refuel, and keep it well lubricated during work.
2. Each part of the swing frame has been adjusted before leaving the factory. Do not disassemble it randomly during use.
3. Add an appropriate amount of No. 30 engine oil to the lubricating place before each shift, and the butter should be cleaned and changed once a year in the case of one shift.
4. The locking mechanism should be able to lock the swing frame reliably. When it is released, it should be completely separated from the swing part. The swing frame should only be released during the measurement. The rest of the time should be locked.
5. Non-working hours should not be placed on the rack for a long time with balanced parts.
6. The electrical box should be kept clean and protected from moisture.
7. When the machine is found to be abnormal during use and cannot be handled, it should promptly cut off the power and notify the maintenance team.

Summary: The cleaning of the dynamic balancing machine is not troublesome. A clean dynamic balancing machine is not only comfortable to use by itself, but also reduces the occurrence of faults and effectively extends the service life. Of course, if you don't want to do it yourself, you can contact the balancer manufacturer to clean it, but you can save money and rest assured.