Although many manufacturers producing rotating workpieces are now equipped with dynamic balancing machines, and their understanding of dynamic balancing machines is getting deeper and deeper, many people cannot answer the three major systems of starting balancing machines. Generally, the three systems of the dynamic balancing machine refer to the three major parts of the universal dynamic balancing machine: motor drive, mechanical vibration, and signal measurement processing.

The following introduces the detection system of this detection equipment in detail:

1. The motor drive part of the detection system: the main function is to drive the rotor to rotate at the speed required for balance;
2. Mechanical vibration part: the main function is to support the rotor, so that the rotor generates a regular amount of vibration when rotating;
3. Signal measurement processing part: It converts physical quantities into electrical signals through sensors and sends them to the measurement system for signal analysis and processing;

Note: Because the vibration signal is relatively weak, the detection system of the rotor balancing machine is susceptible to external interference. Therefore, the signal must be specially processed to achieve the correct detection result.


The above are the three major systems of dynamic balancing machines, which are the most basic components of dynamic balancing machines. They are indispensable. If someone asks them later, they will not be afraid to answer them.