Intelligent production methods are being carried out in many factories nowadays. In today's factories, the use of machinery is increasing, and the use of labor is decreasing. At present, the production of many rotors uses machinery to operate, which greatly reduces the cost of labor. Intelligent production is very meaningful. The automatic balancing machine calibration greatly improves the efficiency of operation. It is a very intelligent product and has been welcomed by us. Fully automatic balancing machine is an unmanned rotor dynamic balance correction to improve product quality.
The automatic balancing machine rotor dynamic balance correction greatly improves the rotor production efficiency. It transfers the rotor to the measuring station through the pipeline transmission method for dynamic balance measurement and correction. When the automatic balance machine has obstacles to calibration, it will announce an alarm Sound, at this time, the operator will be prompted to perform a test, and when the obstacle is eliminated, the rotor dynamic balance can be corrected again. The cost of the automatic balancing machine is not very high, but the work efficiency is very high. In many large factories nowadays, automatic balancing machines are selected to correct the rotor dynamic balance. Its rotor dynamic balance correction has been welcomed by many people and has become a must-have product for many enterprises.
At present, there are many brands of automatic balancing machines on the market, and there are many choices. You can choose the appropriate balancing machine according to the required function and calibration workpiece.
For an electrical idiot like me who ca n’t find a switch on a TV, the automatic balance machine means that after reading the manual several times, I still can only choose to contact the customer service sister silently, and teach me step by step The method, um, is the deep impression that you should never forget.
1. The operator places the new rotor in the measuring station and presses the start button.
2. Wait for the rotor processing at each station to complete.
3. At the same time, the manipulator moves the rotor on the measurement station to the cutting and deduplication station to correct the unbalance amount.
4. Transfer the rotor that has completed the initial calibration from the cutting and deduplication station back to the measurement station for retesting:
5. At this time, if the rotor on the measuring station is qualified, continue to step 1; if the rotor is not qualified, continue to step 2.
This article is provided by Guangzhou Zhuoxuanjin Machinery Equipment Co., Ltd. The company specializes in the design, development and sales of automatic balancing machines, automatic positioning dynamic balancing machines, self-driven full-automatic balancing machines, loop driven balancing machines, universal joint balancing machines Horizontal dynamic balance machine, vertical dynamic balance machine, on-site dynamic balance instrument, etc., you can also develop various types of dynamic balance machine according to your requirements.
You can also contact our online customer service (qq: 3233915463 // phone: 18933956581 // landline: 020-36969823) We will serve you wholeheartedly and look forward to your contact.