lzx@zxjsb.com

020-36969823

Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website

Search

zuoxuanjin

Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd

18933956581
Customer service team:
在线客服
QQ:
Service time:
0:00 - 24:00

ABOUT US

Follow us

SITE NAVIGATION

CONTACT US

© 2018  Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd  |  All rights reserved 粤ICP备14035600号

 

Contact: Miss Li
Fax: 020-36969822
Tel: 020-36969823
Mobile phone: 18933956581
Mailbox: yingliokok@163.com

SOLUTION

 

Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)

SOLUTION

>
>
Learn about the three measurement modes of dynamic balancing machines

Learn about the three measurement modes of dynamic balancing machines

Page view
[Abstract]:
What measurement method is suitable for the rotor dynamic balancing machine? With the continuous brushing of the automatic balancing machine, many domestic manufacturers of dynamic balancing machines

What measurement method is suitable for the rotor dynamic balancing machine? With the continuous brushing of the automatic balancing machine, many domestic manufacturers of dynamic balancing machines are following this trend. As users, you need to think more calmly when choosing a dynamic balancing machine. What you need is a stable and practical measuring instrument. Or the black technology that entertains itself? The following is an analysis by the editor on whether the automatic positioning dynamic balancing machine is good or the automatic balancing machine?

First of all, I will introduce the common economic dynamic balancing machine. Its advantages are relatively cheap, fast return on investment, suitable for rotors with low balance accuracy requirements, and high versatility. The disadvantage is the measurement accuracy and The repeatability is relatively inferior and the operation is relatively complicated.

With the advancement of technology, the trend of factory quality production, users' continuous improvement of product quality and safety, more powerful computing capabilities, and higher system scalability of automatic positioning dynamic balancing machines. Representative technologies include horizontal automatic positioning dynamic balancing machines and Vertical automatic positioning balancer, etc.

The positioning technology and control technology of the automatic positioning dynamic balancing machine. The positioning measurement system is composed of servo motors, sensors and other components. The performance is calculated by the measurement system and calibrated for unbalanced positions for rotational positioning. The measurement system itself has strong calculation and analysis capabilities. The measurement time of the rotor only needs 3 to 5 seconds. Repeatability is only 3 mg.

 


Fully automatic balancing machines do not require manual operation and calibration, so they are most widely used in rotor manufacturing plants. The following briefly introduces the five advantages of the automatic balance machine.

1. Intelligent: The automatic balancing machine is controlled by an intelligent operating system. The computer can control the dynamic balancing machine. The computer displays the same system operating interface as the dynamic balancing machine. About the state, measurement data, abnormality and The power display can be seen on the computer operation interface and corresponding operations can be performed, making the management information and operation more intuitive, and subverting the traditional dynamic balancing machine operation mode.

2. Good compatibility: The automatic balance function can be easily connected with other production equipment to achieve pipeline calibration; the targeted open part supports a variety of pipelines.

3. Self-checking for failures: The automatic balancing machine is equipped with self-checking for failures to easily achieve remote technical support and troubleshooting. Dynamic balancing machine self-checking software is a tool software for dynamic balancing machine debugging and troubleshooting developed by Zhuo Xuanjin. It can easily observe the status of the input and output of the balancing machine, and then determine the measurement status.

4. Long service life: The components of the automatic balancing machine are made of high-quality military industrial electronic components with a long service life (more than 8 years).

5. Safety design: The full-automatic balancing machine adopts lightweight and high-strength aluminum alloy structures and safety covers, which are more resistant to corrosion and magnetization than traditional tinplate structure dynamic balancing machines.

 

This article is provided by Guangzhou Zhuoxuanjin Machinery Equipment Co., Ltd. The company specializes in the design, development and sales of automatic balancing machines, automatic positioning dynamic balancing machines, self-driven full-automatic balancing machines, loop driven balancing machines, universal joint balancing machines Horizontal dynamic balance machine, vertical dynamic balance machine, on-site dynamic balance instrument, etc., you can also develop various types of dynamic balance machine according to your requirements.

You can also contact our online customer service (qq: 3233915463 // phone: 18933956581 // landline: 020-36969823) We will serve you wholeheartedly and look forward to your contact.

 

Guangzhou Zhuoxuanjin Machinery Equipment Co., Ltd.
Call now to enjoy the offer

hotline:18933956581(24 hours)

Click for a quote