Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website
Contact: Miss Li
Mobile phone: 18933956581
© 2018 Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd | All rights reserved 粤ICP备14035600号
Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)
The automatic balance machine and the automatic positioning dynamic balance machine are better.
What correction method is suitable for rotor dynamic balance correction? With the continuous improvement of product quality requirements, high-precision automatic positioning dynamic balancing machines are constantly refreshed, and many domestic manufacturers of dynamic balancing machines are following this trend. As a user, you need to think more calmly when choosing a balancing machine. Do you need a stable and practical calibration tool or black technology from Entertainment? Now let's analyze whether it is a good automatic balancing machine or an automatic positioning dynamic balancing machine?
Firstly, the commonly used traditional dynamic balancing machine is introduced. Its advantages are relatively cheap and fast return on investment. It is suitable for rotors with relatively low accuracy requirements. It has high measurement versatility. The disadvantage is that the process is too complicated and the measurement accuracy is poor. Requires a higher rotor, the measurement repeatability is not high, and the measurement time is long.
With the advancement of technology and the trend of factory quality production and efficiency improvement, users consider the use of high-precision dynamic balancing machines, which have more flexible scheduling, stronger local computing capabilities, higher system scalability, and for some high-efficiency Calibration requirements. Representative technologies are automatic balancing machines and automatic positioning dynamic balancing machines.
The thresholds for the automatic positioning dynamic balancing machine imbalance positioning technology and operation control technology are not high. The automatic positioning system consists of a single-chip microcomputer, a stepper motor, and a high-sensitivity sensor. The measurement performance of the sensor, the determination of calibration information (speed or other), and the stepper motor's speed and stop position are only in the case of non-overload. Depending on the frequency of the pulse signal and the number of pulses (location based on the number of pulses is called the "step angle"), the measurement time is 3 to 5 seconds and the measurement accuracy can reach less than milligrams.
This article is provided by Guangzhou Zhuoxuanjin Machinery Equipment Co., Ltd. The company specializes in the design, development and sales of automatic balancing machines, automatic positioning dynamic balancing machines, self-driven full-automatic balancing machines, loop-driven balancing machines, universal joint balancing machines, Horizontal dynamic balance machine, vertical dynamic balance machine, on-site dynamic balance instrument, etc., you can also develop various types of dynamic balance machine according to your requirements.
You can also contact our online customer service (qq: 3233915463 // phone: 18933956581 // landline: 020-36969823) We will serve you wholeheartedly and look forward to your contact.