Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website
Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)
Application case of automatic positioning dynamic balancing machine in motor rotor
The motor rotor automatic positioning dynamic balancing machine is a kind of automatic positioning dynamic balancing machine that can be widely used in batch balance detection of shaft rotors such as automobile starters, micro motors, servo motors, power tools, etc. It is a modern motor rotor dynamic balance measurement technology. Representative equipment. In order to quickly and accurately measure the rotor unbalance function, this equipment uses Zhuoxuanjin YYQ-DW series electrical measurement system. It is a high-precision dynamic balancing machine measurement system independently developed by Zhuoxuanjin. It is designed according to the professional support of centrifugal mechanics. + High-sensitivity sensing system, can accurately measure the size of the unbalance of the motor rotor, and stop the unbalance at the specified position. And strictly in accordance with ISO9001-2000 international quality standards for production. It is a sharp tool for motor rotor dynamic balance measurement. At present, it has been used in batches in rotor dynamic balance measurement of automobile starters, micro motors, power tools, etc.
Site requirements: The parking position of the dynamic balancing machine needs to be flat, free of oil, water, power interference, and ventilation.
Workpiece outer diameter: the maximum allowable within 120mm (including 120mm)
Supporting distance: the maximum distance between the two supporting seats of the dynamic balancing machine is 360mm (including 360)
1. Measurement advantages: adopt self-developed automatic positioning electrical measurement system (measurement time 3 ~ 5 seconds).
2. Product highlights: The whole machine is produced, designed and measured in accordance with the international quality standards of ISO9001-2000, and the maximum outer diameter of the workpiece can be measured at 120 (mm).
3. Protection safety: triple safety protection (electric measuring sensor, safety protection device, emergency stop button).
4. Simple operation: one hour training, free to work. Easy to master the feeding process, no longer worry about adding the wrong position.
Install the motor rotor to the measuring station, press the start button, and then the sensor system will collect and position the unbalanced data. After the measurement is completed, the dynamic balancer transmission system will stop the unbalanced value at the specified position. After the suggested imbalance size is corrected, press the start button and the dynamic balancing machine will perform retest. If the retest shows unqualified and continue the operation according to the previous step until it displays qualified.、
The product quality is improved by the YYQ-5DW (S) motor rotor automatic positioning dynamic balancing machine. Its rapid measurement capability greatly improves production efficiency, shortens measurement time, reduces noise and vibration generated when the motor is started, extends product life, and improves Product market competitiveness.
Introduction of YYQ-5DW (S) motor rotor automatic positioning dynamic balancing machine
No need to mark the measurement, can achieve high
Automatic tracking groove technology will not cause
positioning error due to belt slip
WindowsEnglish measurement software, can log in 100
specifications, a calibration call at any time
No need to stick reflective mark, USB data export, N kinds
of data storage, flexible location
Touch screen display, touch - on, simple and beautiful
Weighting/deweighting can be switched at will and is
easy to use
The equipment is equipped with automatic diagnosis
function and easy maintenance
Set many advantages in one, only to give customers the perfect dynamic balance detection, so that customers feel more at ease
Automatic marking system (optional) can also display left
and right positioning Angle difference
Keep Improving Pursue Perfection
Because of professional, so trust
Essential InformationProduct Paramete
And the number
Maximum outside diam
eter of workpiece(mm)
Distance between two
Ring belt drive shaft