Project Background
Micromotor automatic positioning dynamic balancing machine is a batch balance detection device that can be widely used in DC motors, reduction motors, generators, power tools and other small shaft rotors. It is a representative device of modern micromotor dynamic balance measurement technology. In order to quickly and accurately measure the rotor unbalance function, this instrument adopts Zhuoxuanjin YYQ-DW series electrical measurement system. It is a high-precision dynamic balancing machine measurement system independently developed by Zhuoxuanjin. It is designed according to the professional support of centrifugal mechanics. + High-sensitivity sensing system, can accurately measure the unbalance of the micro-motor rotor, and stop the unbalance at the specified position. And strictly in accordance with ISO9001-2000 international quality standards for production. It is a sharp tool for micro-motor rotor dynamic balance measurement. At present, it has been used in batches in the measurement of dynamic balance of micro rotors such as DC motors, gear motors, and generators.

basic situation
Site requirements: The dynamic balancing machine can be placed on the table, but it needs to be flat, free from oil pollution, no power interference, and ventilated.
Workpiece outer diameter: the maximum allowable within 30mm (including 30mm)
Supporting distance: the maximum distance between the two supporting seats of the dynamic balancing machine is 360mm (including 360)

Features
1. Measurement advantages: adopt self-developed automatic positioning electrical measurement system (measurement time 3 ~ 5 seconds).
2. Product highlights: The whole machine is produced, designed and measurable in accordance with ISO9001-2000 international quality standards, and the maximum outer diameter of the workpiece can be measured at 30 (mm).
3. Protection safety: triple safety protection (electric measuring sensor, safety protection device, emergency stop button).
4. Simple operation: one hour training, free to work. Easy to master the feeding process, no longer worry about adding the wrong position.

Calibration process
Install the micromotor rotor to the measuring station, press the start button, and then the sensor system will collect and position the unbalanced data. After the measurement is completed, the dynamic balancer transmission system will stop the unbalanced value at the specified position. After adding and correcting the unbalance size indicated by the system at the specified position, press the start button, and the balancing machine will perform retest. If the retest shows unqualified and continue the operation according to the previous step until the display is qualified.

project outcome
Through the YYQ-0.25DW micro-motor rotor automatic positioning dynamic balancing machine to achieve product quality improvement, its rapid measurement capability greatly improves production efficiency, shortens measurement time, reduces noise and vibration generated when the micro motor starts, and extends the service life of supporting products. Improve product market competitiveness.

Introduction of YYQ-0.25DW micromotor rotor automatic positioning dynamic balancing machine