lzx@zxjsb.com

020-36969823

Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website

Search

zuoxuanjin

Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd

18933956581
Customer service team:
在线客服
QQ:
Service time:
0:00 - 24:00

ABOUT US

Follow us

SITE NAVIGATION

CONTACT US

© 2018  Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd  |  All rights reserved 粤ICP备14035600号

 

Contact: Miss Li
Fax: 020-36969822
Tel: 020-36969823
Mobile phone: 18933956581
Mailbox: yingliokok@163.com

SOLUTION

 

Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)

SOLUTION

Basic concept of field dynamic balance

Page view
[Abstract]:
1.SinglesidedynamicbalanceGenerallyspeaking,whentherotordiameteris7~10timeslargerthanitslength,itisusuallytreatedasasingle-sidedrotor.Inthiscase,inordertorestoretherotorcenterofmassthatdeviatesfromthe

1. Single side dynamic balance

Generally speaking, when the rotor diameter is 7 ~ 10 times larger than its length, it is usually treated as a single-sided rotor.In this case, in order to restore the rotor center of mass that deviates from the axis to the axis position, it is only necessary to place an equal torque correction mass at any reverse position of the diameter of the center of mass.This process is called "one-sided equilibrium".

 

2. Double-sided dynamic balance

For rotors with diameters less than 7-10 times the length, they are usually treated as double-sided rotors.In a double-sided rotor, if two equal masses are arranged at both ends of the axis and the axis is symmetric, then the rotor does not have the problem that the center of mass deviates from the axis, that is, static balance.However, once the two masses are rotated, the centrifugal force generated by each of them forms a force couple. The inertia axis and the rotation axis no longer coincide, resulting in violent vibration of the bearing.Or the inertia axis is inclined to the rotation axis, and the two masses are asymmetric, causing the center of mass to deviate from the axis, which is the most common imbalance in the double-sided rotor.This imbalance must be eliminated by vibration measurements during rotation and the placement of the correction mass on at least two planes.This process is called "two-sided balance".