Welcome to Guangzhou Zhuoxuanjin Machinert Equipment co.Ltd official website
Professionally provides dynamic balance detection, correction and dynamic balance cleaning equipment for all types of high speed rotating workpieces (from 500 to 10,000 rpm)
Error code translation for dynamic balancer
When an error is detected during the measurenent contents is displayed with the error codes. The display place is connon with the vibration displacement and the revolve display.
Err.0 Unable to detect the signal from rotary sensor.
Err.1 The measruement revolve exceeds the measurement range.
Err.2 The revolve of machine is actually unstable.
Err.3 The rnbalance vibrarion exceeds the measurement range
Err.4 The amount of the rest weight is improper.
Err.5 Designated correction amount is too large.
Err.6 Memorizing am influence coefficient is failure.
Err.7 Memorizing the setting data or the measurement data is failure.
Err.8 The revolve of the addition measurement or the residual measurement is
different from the revolve of the initial measurement(±2%).